| No. | Brand | E | J | G | w | f | l | S | L |
| MH-1381 | KOYO | - | - | - | - | - | - | - | - |
| 46324AS | KOYO | - | - | - | - | - | - | - | 190.5 mm |
| 51101 | KOYO | - | - | - | - | - | - | - | - |
| 15BTM2110JA | KOYO | - | - | - | - | - | - | - | - |
| 30206CR | KOYO | - | - | - | - | - | - | - | - |
| 33116JR | KOYO | - | - | - | - | - | - | - | - |
| UCFL204E | KOYO | - | - | - | - | - | - | - | - |
| NJ224 | KOYO | - | - | - | - | - | - | - | - |
| 3NCHAC018CA | KOYO | - | - | - | - | - | - | - | - |
| Y1212 | KOYO | - | - | - | - | - | - | - | - |
| BTM505816J | KOYO | - | - | - | - | - | - | 4.763 mm | - |
| WJC-060806 | KOYO | - | - | - | - | - | - | - | - |
| NAP206 | KOYO | - | - | M 52x3 | - | - | - | - | - |
| 24196RHA | KOYO | - | - | - | - | - | - | - | - |
| NU2320 | KOYO | - | - | - | - | - | - | - | - |
| 46150/46368 | KOYO | - | - | - | - | - | - | - | - |
| 6834ZZ | KOYO | - | - | - | - | - | - | - | - |
| HM89449/HM89411 | KOYO | - | - | 337.896 mm | - | - | - | - | - |
| UCFCX06-20E | KOYO | - | - | - | - | - | - | - | - |
| 305183/1D | KOYO | - | - | - | - | - | - | - | - |
| UCF216E | KOYO | - | - | - | - | - | - | 0.794 mm | - |
| UC205-14 | KOYO | - | - | - | - | - | - | - | - |
| 17 mm x 40 mm x 19,1 mm KOYO SA203F deep groove ball bearings | d:200 mm; Basic dynamic load rating C:369 kN; d1 ≈:220 mm; Mass bearing:5.7 kg; D:250 mm; Reference speed:1100 r/min; B:50 mm; ra max.:1.5 mm; r1,2 min.:1.5 mm; b1:7 mm; Size (mm):17 mm x 40 mm x 19,1 mm ; |
| 90 mm x 140 mm x 24 mm KOYO 3NCHAC018C angular contact ball bearings | B:16 mm; Basic dynamic load rating C:44 kN; l4 max.:106 mm; Basic static load rating C0:57 kN; h1:77 mm; d:20 mm; d4 ≈:28 mm; Mass rod end:0.34 kg; d2 max.:54 mm; Specific dynamic load factor K:150 N/mm²; Size (mm):90 mm x 140 mm x 24 mm ; |
| KOYO UCTH213-40-300 bearing units | Mass pillow block:85.7 kg; Taconite seal:TER 118; h:60.325 mm; P120°:125 kN; Pa:24.9 kN; H1:152.4 mm; L:466.725 mm; A2:279.4 mm; RG:1/2 NPT; End plug (suffix Y):EPR 15; |
| KOYO VE324020SB1 needle roller bearings | A:4 mm; Lock nut:HME 3084; B1:168 mm; G2:M 6; G3:9 mm; d3:490 mm; Mass adapter sleeve assembly:37.6 kg; d1:400 mm; Locking device:MS 3084; Hydraulic nut:HMV 84E; |
| 50 mm x 80 mm x 16 mm KOYO N1010 cylindrical roller bearings | Grease Speed Rating Open/Shielded n1:3600 rpm; D:180.0000 mm; Grease Speed Rating n1:3600 rpm; Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:2400 rpm; Basic Dynamic Radial Load Rating C:133000 N; Oil Speed Rating Open/Shielded n2:4300 rpm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:96500 N; d:85.000 mm; Size (mm):50 mm x 80 mm x 16 mm ; |
| 670 mm x 1090 mm x 412 mm KOYO 241/670R spherical roller bearings | F:89 mm; Basic dynamic load rating C:205 kN; B:35 mm; Mass bearing:2.15 kg; db min.:92 mm; rb max.:2 mm; da max.:86 mm; Limiting speed:5600 r/min; Da max.:137.5 mm; r1,2 min.:2.1 mm; Size (mm):670 mm x 1090 mm x 412 mm ; |
| 20 mm x 52 mm x 15 mm KOYO 6304N deep groove ball bearings | ra max.:6 mm; Calculation factor Y0:3.2; Calculation factor Y1:3.2; Basic dynamic load rating C:7919 kN; D:980 mm; db min.:696 mm; d2 ≈:772 mm; Fatigue load limit Pu:880 kN; B:230 mm; d1:630 mm; Size (mm):20 mm x 52 mm x 15 mm ; |
| KOYO K25X33X24H needle roller bearings | Basic dynamic load rating C:5500 kN; B:368 mm; b:16.7 mm; d:475 mm; D1 ≈:562.3 mm; Basic static load rating C0:14600 kN; r3,4 min.:3 mm; C:368 mm; Fatigue load limit Pu:1270 kN; Mass bearing:235 kg; |
| 140 mm x 300 mm x 102 mm KOYO NU2328 cylindrical roller bearings | Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:52700 N; Oil Speed Rating Open/Shielded n2:6000 rpm; d:85.000 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Sealed Speed Rating n3:3000 rpm; Accessories:Two Seals & Snap-Rin; D:130.0000 mm; Basic Static Radial Load Rating Co:45000 N; B:22.00 mm; Size (mm):140 mm x 300 mm x 102 mm ; |
| 35 mm x 100 mm x 25 mm KOYO N407 cylindrical roller bearings | Da:180 mm; RG:3/8 NPT; End plug (suffix Y):EPR 10; Cap bolt:2 x 3/4-10 UNC; J1:60.325 mm; h:47.625 mm; Pa:10.5 kN; Bearing:1317 K; A1:111.125 mm; Stabilizing ring:2 x SR-1617; Size (mm):35 mm x 100 mm x 25 mm ; |
| KOYO UKCX08 bearing units | Material constant KM:330; h:210 mm; G:M 52x3; l1 min.:115 mm; Mass rod end:5.7 kg; d2 max.:137 mm; r1 min.:1 mm; l2 max.:281 mm; d:60 mm; Basic dynamic load rating C:245 kN; |
| 25 mm x 47 mm x 12 mm KOYO SE 6005 ZZSTMG3 deep groove ball bearings | Grease Speed Rating n1:4300 rpm; D:150.0000 mm; d:85.000 mm; Oil Speed Rating n2:5000 rpm; Oil Speed Rating Open/Shielded n2:5000 rpm; Basic Dynamic Radial Load Rating C:83200 N; B:28.00 mm; Sealed Speed Rating n3:2800 rpm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:64000 N; Size (mm):25 mm x 47 mm x 12 mm ; |
| KOYO ARZ 22 55 106 needle roller bearings | K:12 mm; ra max.:5 mm; d2 ≈:467 mm; Calculation factor Y2:2.7; Calculation factor e:0.37; Limiting speed:500 r/min; Calculation factor Y0:1.8; b:22.3 mm; G:Tr 420x5; Mass bearing + sleeve:365 kg; |
| KOYO MH-1381 needle roller bearings | Db2:84 mm; Recommended tightening torque for grub screw:4 N·m; T:42.2 mm; RG:1/4-28 UNF; Basic dynamic load rating C:19.5 kN; Thread grub screw G2:M6x0.75; End cover:ECY 206; B:38.1 mm; J7:24.5 mm; Limiting speed:1200 r/min; |
KOYO M88040/M88010 tapered roller bearings - M88040/M88010
The online KOYO M88040/M88010 tapered roller bearings parts store gives Ruville BEARING COMPANY you immediate access 3.1 in Dimension H to a
KOYO - M88040/M88010 BEARING - CRB BEARING CO.,LTD
Imported KOYO M88040/M88010 bearings sales center - CRB Bearing Co. Ltd. stock KOYO M88040/M88010 bearings, M88040/M88010 bearings to provide
KOYO M88040/M88010 bearing - Genuine bearing expert
❀❀❀Tapered roller bearing M88040-M88010-TIMKEN IN STOCK, dim : Ø int. 28.58 x Ø ext. 68.26 x th. 22.23 mm. SAME DAY SHIPPING. The specialist at your
Bearing M88040/M88010 (KOYO) | Size and Specification
Tapered roller bearings M88040/M88010. Bearing number : M88040/M88010. Brand : KOYO. Bore Diameter (mm) : 28,575. Width (mm) : 22,225. Bearing
KOYO M88040/M88010 Keramiek Laers KG
ONLINE BEARING: ... Rod laers SNR 645/632 DASSY MRC M88040/M88010 Keramiek Laers KG 645 / 632 D P3 MRS M88040 M88010 Rollaers WBF 645/632
M88040/M88010 in Sofia-KOYO Bearings - FAG,SKF bearings
Our KOYO M88040/M88010 bearings and other bearings are 100% compliant with the international quality standard ISO 9001 and are highly appreciated in
KOYO M88040/M88010 tapered roller bearings Video