| No. | Brand | r | Z | n | K | N | m | W | l |
| HCS71919-C-T-P4S | FAG | 1,5 mm | - | - | - | - | - | - | - |
| 32217-A | FAG | - | - | - | - | - | - | - | - |
| 29426-E1 | FAG | - | - | - | - | - | - | - | - |
| RN217-E-MPBX | FAG | - | - | - | - | - | - | - | - |
| 22352-K-MB | FAG | - | - | - | - | - | - | - | - |
| 32248-A | FAG | - | - | - | - | - | - | - | - |
| 53310 | FAG | - | - | - | - | - | - | - | - |
| 713617370 | FAG | - | - | - | - | - | - | - | - |
| SA1021 | FAG | - | - | - | - | - | - | - | - |
| 713613450 | FAG | - | - | - | - | - | - | - | - |
| 232/600-E1A-MB1 | FAG | - | - | - | - | - | - | - | - |
| NN3052-AS-K-M-SP | FAG | - | - | - | - | - | - | - | - |
| S6206 | FAG | - | - | - | - | - | - | - | - |
| BSB075110-T | FAG | - | - | - | - | - | - | - | - |
| 23224-E1-TVPB | FAG | - | - | - | - | - | - | - | - |
| NNU4930-S-M-SP | FAG | - | - | - | - | - | - | - | - |
| 6200-2RSR | FAG | - | - | - | - | - | - | - | - |
| 7207-B-TVP | FAG | - | - | - | - | - | - | - | - |
| 20318-K-MB-C3 | FAG | - | - | - | - | - | - | - | - |
| 23944-S-K-MB | FAG | - | - | - | - | - | - | - | - |
| jrm3939 | Timken | - | - | - | - | - | - | - | - |
| HSS71904-E-T-P4S | FAG | - | - | - | - | - | - | - | - |
| 29280-E-MB | FAG | - | - | - | - | - | - | - | - |
| 230/710-B-K-MB + H30/710-HG | FAG | - | - | - | - | - | - | - | - |
| 803196AB.E48CA.H95AB | FAG | - | - | - | - | - | - | - | - |
| NU2276-E-TB-M1 | FAG | - | - | - | - | - | - | - | - |
| B7028-E-2RSD-T-P4S | FAG | - | - | - | - | - | - | - | - |
| KH414242-H414210 | FAG | - | - | - | - | - | - | - | - |
| NJ2218-E-TVP2 + HJ2218-E | FAG | - | - | - | - | - | - | - | - |
| 15 mm x 28 mm x 7 mm FAG 61902-2RSR deep groove ball bearings | d:710 mm; Constant e:0.22; Weight:676.000 kg; Axial Load Factor Y0:3.03; Enclosure:Open; Limiting Speed - Grease:370 rpm; da (min):746 mm; Configuration:Double Row; Hole Diameter (do):20 mm; D:1030 mm; Size (mm):15 mm x 28 mm x 7 mm ; |
| 50 mm x 90 mm x 23 mm FAG 2210-2RS-TVH self aligning ball bearings | Weight:2.62 Kg; r min.:2.1 mm; Basic static load rating (C0):81,5 kN; Bore Diameter (mm):95; Width (mm):32; ra max.:2.0 mm; C:32 mm; B:32 mm; d:95 mm; Bearing number:6219Z; Size (mm):50 mm x 90 mm x 23 mm ; |
| 10 mm x 30 mm x 9 mm FAG 6200-2RSR deep groove ball bearings | Designation Ruville:5708; Designation SKF:VKBA 1355; Bearing number:R157.08; Brand:SNR; Compatibility:AUDI / 80 / engine; Designation FAG:713610170; Designation SX:CX040; Size (mm):10 mm x 30 mm x 9 mm ; |
| 35 mm x 72 mm x 17 mm FAG 7207-B-TVP angular contact ball bearings | d:150 mm; Outer Diameter (mm):270; D:270 mm; Width (mm):88,9; Size (mm):35 mm x 72 mm x 17 mm ; B:88,9 mm; C:88,9 mm; Brand:ISO; Bearing number:NUP5230; Bore Diameter (mm):150; |
| 35 mm x 55 mm x 10 mm FAG 61907-2RSR deep groove ball bearings | r1 min.:0.3 mm; b:7.5 mm; Basic dynamic load rating (C):55,5 kN; d2:30 mm; Size (mm):35 mm x 55 mm x 10 mm ; Outer Diameter (mm):68; Weight:0.881 Kg; (Grease) Lubrication Speed:2400 r/min; T1:31 mm; a:10 mm; |
| 90 mm x 160 mm x 40 mm FAG NJ2218-E-TVP2 + HJ2218-E cylindrical roller bearings | D:171,45 mm; Size (mm):90 mm x 160 mm x 40 mm ; B:28,58 mm; Brand:SIGMA; Outer Diameter (mm):171,45; Bearing number:LJT 3.3/4; C:28,58 mm; d:95,25 mm; Width (mm):28,58; Bore Diameter (mm):95,25; |
| 35 mm x 62 mm x 14 mm FAG HCB7007-C-T-P4S angular contact ball bearings | r - Cup Backface To Clear Radius1:0.06 in; Cup Part Number:L327210; Design Units:Imperial; Y - ISO Factor3:1.72; Series:L327200; Da - Cup Frontface Backing Diameter:6.77 in; C - Cup Width:0.8125 in; e - ISO Factor2:0.35; Db - Cup Backface Backing Diameter:6.57 in; Cg - Geometry Factor:0.158; Size (mm):35 mm x 62 mm x 14 mm ; |
| FAG 713611570 wheel bearings | Bearing number:GE 080 XES; Outer Diameter (mm):130; C:50 mm; Size (mm):80x130x75; B:75 mm; D:130 mm; Bore Diameter (mm):80; d:80 mm; Brand:ISO; Width (mm):75; |
| 85 mm x 170 mm x 45 mm FAG T7FC085 tapered roller bearings | Fw:12 mm; Bc:13 mm; Bearing number:K12×17×13; Basic static load rating (C0):9,4 kN; Ew:17 mm; Outer Diameter (mm):17; Weight:0.0075 Kg; Bore Diameter (mm):12; Brand:NTN; Basic dynamic load rating (C):9 kN; Size (mm):85 mm x 170 mm x 45 mm ; |
| 65 mm x 140 mm x 33 mm FAG QJ313-MPA angular contact ball bearings | Size (mm):65 mm x 140 mm x 33 mm ; r:1.1 mm; Width (mm):18; D:90 mm; Brand:KBC; C:18 mm; Outer Diameter (mm):90; Basic dynamic load rating (C):31 kN; (Grease) Lubrication Speed:7500 r/min; Bore Diameter (mm):55; |
| 35 mm x 80 mm x 21 mm FAG 1307-K-TVH-C3 self aligning ball bearings | Inner-Ring Set:1040ARXS3882; Width B:1000.000 mm; Width C:1000.000 mm; Backing Shaft Diameter ds:1110.2 mm; Angle of Chamfer r1smin:20º; Type:RX-7; Lubrication Groove g:22.0 mm; Bore d:1040.000 mm; Weight:10969.800 lb; Dynamic Load Rating C11:101200 kN; Size (mm):35 mm x 80 mm x 21 mm ; |
| 530 mm x 710 mm x 136 mm FAG 239/530-K-MB spherical roller bearings | Weight:2,95 Kg; E:23,4 mm; D:140 mm; C:30 mm; Bore Diameter (mm):80; Outer Diameter (mm):140; B1:38 mm; F:97 mm; Width (mm):53,2; G:8,8 mm; Size (mm):530 mm x 710 mm x 136 mm ; |
| 20 mm x 37 mm x 9 mm FAG HSS71904-E-T-P4S angular contact ball bearings | Bore Diameter (mm):3,967; Width (mm):2,779; Brand:ISB; r min.:0,1 mm; Outer Diameter (mm):7,938; Bearing number:R155; C:2,779 mm; B:2,779 mm; d:3,967 mm; D:7,938 mm; Size (mm):20 mm x 37 mm x 9 mm ; |
| FAG 713690600 wheel bearings | Basic dynamic load rating (C):865 kN; Outer Diameter (mm):80,963; Brand:SKF; Coefficient of friction µ min.:0.02; Factor depending on material and bearing type KM:1900; M:6 mm; Bore Diameter (mm):76,2; D:80,963 mm; c1 max.:1 mm; Coefficient of friction µ max.:0.2; |
FAG B7201-E-2RSD-T-P4S bearing - heuristik-communication
Original FAG B7201-E-2RSD-T-P4S bearing. 12x32x10. Get the best deal for Wheel Hubs & Bearings for 1985 BMW 735i from the largest online selection at
FAG precision bearings - Nodes bearing
FAG B7001-E-2RSD-T-P4S spindle bearings | 12x28x8mm .... Nodes bearings have FAG B7201-E-2RSD-T-P4S bearings in stock, precision spindle bearing,
Spindle bearings - B7201-E-2RSD-T-P4S - medias - Schaeffler
B7201-E-2RSD-T-P4S. Spindle bearings adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances
Spindellejer - B7201-E-2RSD-T-P4S
B7201-E-2RSD-T-P4S. Spindellejer anstilte, par- eller sætvis, trykvinkel α = 25°, gummitætninger på begge sider, berøringsfri, indsnævrede tolerancer
Spindle Bearing B7210-E-2RSD-T-P4S-UL >> Infos here!, 111
The spindle bearing B7210-E-2RSD-T-P4S-UL is a super precision angular ball bearing (DIN 628-1) with a contact angle of 25°. It is suitable for the use in
FAG B7215-E-2RSD-T-P4S Super Precision Angular contact
FAG B7215-E-2RSD-T-P4S Super Precision Angular contact ball bearing. Larger Image. Brand: FAG ... B7201-E-2RSD-T-P4S 12*32*10. B7202-E-2RSD-T-P4S
12 mm x 32 mm x 10 mm FAG B7201-E-2RSD-T-P4S angular contact ball bearings Video